cast iron and indestructible. Take your measurements. You may have to remove the bathroom door and molding to get it out. You might want to give it away free, if the person fixes any damage done while removing it.

Offer it to anyone who will remove it and make repairs.
Win win situation

My grandmother had one. We actually stopped by the house, when we noticed it was abandoned, to see if it was still there.

I'm guessing the door trim will have to be removed. Have you taken the measurements with a tape measure, or just an 'eyeball' estimate? I just had to move a huge cardboard box from garage to the screened in porch and thought I'd never get it through the doorway, but surprisingly enough, it just fit.

but I didn't really check the height -- it may be shorter than wide after all.

We have some pretty chunky moulding around the doors. The doors would probably be 6 inches wider if it were removed.

and the usual way of removing them is, as you surmised, to break it up with a sledgehammer and take it out in pieces. Wear protection, especially eyewear because the chips of porcelain that will fly off are like glass.

If there is a route out, you might be able to hire a few large strong people to remove it but it would probably cost more than you want to spend.

Last edited Thu Dec 14, 2017, 01:08 AM - Edit history (1)

You can remove the legs, flip it over on it's side than push it through the opening-remove the door of course ! Getting it down stairs is another issue ! Or, there is a market for those old tubs and there are business's in the business of restoring those items. OK, so ,you get in touch with them prior to starting your remodel and they will come over to yer house and remove the tub and fixtures for you. May even give you money for that tub.

You start by making phone calls. When I was remodeling those old houses ,the company I used would come out and remove all the old fixtures ,wood work if we were doing a lot of demo,modernization ,tubs ,toilets,sinks and on and so on. In short they bought it and preferred to remove it. you might think to look into that.

here's an example,

https://www.bing.com/images/search?q=old+fixtures+tubs+and+so+forth&qpvt=old+fixtres+tubs+and+so+forth&FORM=IGRE

http://seconduse.com/

… and I still have the original claw-foot bathtub. I was told years ago that the tubs were indeed installed before the walls that enclose the bathroom were put up.

My neighbour had his removed many years ago, and it had to be sawed in half lengthwise (with a power saw that cuts through metal) in order to fit through the doorway.

I would suggest calling a place that refinishes these tubs for resale, and tell them that if they can remove it, they can have it free of charge. In some cases, removing the framework around the doorway provides sufficient room to remove the tub, and replacing the framework is not a big deal or huge expense.

The other alternative is to have the bathroom doorway cut wider – which can then be reconstructed back to its original size after the tub is gone and your new shower is installed.

All of the houses in my neighbourhood had the original tubs, and many have since been removed and replaced. So there must be ways of doing it. The pros probably have all kinds of tricks-of-the-trade, and know the most efficient ways to handle the task.

When we removed ours, we had to take off part of the outside wall in the upstairs bathroom. We brought the new tub and shower in that way, too. Then we put the wall back. If the bathroom has an outside wall, this might work for you, too.

The work we did upstairs was often frustrated by the steep, narrow staircase. We have replaced the stairs with more modern, safe stairs, but it is still steep. Getting a queen sized bed up there was interesting. Getting any furniture upstairs requires much measuring and forethought.

Hope that someone wants it and will haul it away. If it's a 5 or 6 foot tub it can be valuable, the standard 5 1/2 foot not so much. A full set of feet can be of value by themselves.
Depending on the room outside of the bath, removing the feet, turning the tub on it's side and also on end if a tight space can enable the moving. One the most important needs is at least four young STRONG men.

Except, our clawfoot tub was installed during an early 1970's remodel when they built a 2nd bathroom onto what had been the driveway. Meaning the bathroom did not exist when the house was built in 1958.
For all the same reasons, that OP and others have mentioned, I'd love to have a shower in that space, but there is not enough room to maneuver the tub to the outside door, without removing the sink and vanity next to it.
I am starting to realize why later owners of this house left it sitting there. It does come in handy for other uses from time to time.

if that doesn't work and if you haven't broken the rusted thead/stud, cut it. Removing them will give you 4" more clearance.

If you don't want to recycle or reuse or sell, a sledge will break the cast iron but it will be serious work with safety glasses being worn.

We'll leave it there, our needs at this point don't make it worth dealing with.
I DO know there are a lot of homes here that have them.

to trump aesthetics usually with these monsters. In the late 60's and early seventies some people cut the fronts to make extremely uncomfortable couches.

I've moved these things and it was never worth the $200 - $300 plus salvage for them - $.05/lb in the seventies to move them.

It could cost an easy $1,000 to have one moved out now, but there is a good market for them for restoration of old houses. The claw feet alone can be worth a couple of hundred bucks.

I'd have to learn to love it.