Motorcycle & Scooter

So it's been awhile...but hey, it's 105 degrees out in Fort Worth these days.

So I ordered up some parts and they came in so I'm starting on the re-assembly. So far just trying to work things into alignment. Next steps are the triple-tree and front fork reattachment followed by the wire harness



Oil tank in frame

[/IMG][/URL


View looking forward

[/IMG][/URL


Smaller battery opens up space for the horn which usually lies oil soaked under the tray

[/IMG][/URL


I think I’ll use some rubber spacers or foam to go under the tank. I’m not comfortable with
The bolt into the bottom of the tank.

[/IMG][/URL


A good representation of the frame paint colour

[/IMG][/URL


Oil Tank cover and Fuel Tank positioned

[/IMG][/URL]


Battery side cover positioned – Not wholly comfortable with fit yet

[/IMG][/URL]


Note to self – Attach this little bastard to the oil tank BEFORE you put the tank in next time

[/IMG][/URL]


The roll pin for the fuel tank cap was less than cooperative, but plenty of padding prevented damage to the tank

[/IMG][/URL

The tools I used to install the pin. Awl to align the holes and cap, brass punch to drive the pin, and hammer

[/IMG][/URL